browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc



indoor scale flight with a model that performs as well as it looks, the Ares SPAD S.XIII is eveything you’d hope for from a three-channel ultra micro W.W.I biplane.

The SPAD S.XIII was a single-seat French biplane fighter that was mainly of wooden construction with a fabric covering and powered by a 180hp engine. This particular aircraft is modelled on Eddie Rickenbacker’s SPAD. Medal of Honor recipient, Eddie Rickenbacker was America’s most successful fighter ace of World War I with 26 aerial victories to his name.

The Ares [air-eez] SPAD S.XIII is a lightweight three-channel ultra-micro semi-scale model of the original. It features durable foam construction and numerous scale touches such as the 8-cylinder vee-type engine and Vickers machine guns with distinctive 94th Aero Squadron color scheme. Technically advanced the SPAD S.XIII incorporates a Hitec Red 2.4GHz receiver that’s compatible with all current Hitec 2.4GHz aircraft transmitters. For convenience, two versions of the model are available both supplied with Hitec Red protocol: choose either Ready To Fly (including a Hitec Red-enabled transmitter and receiver) or Pair To Fly (supplied with a Hitec Red receiver that’s compatible with your existing Hitec air transmitter). Weighing only an ounce, the SPAD S.XIII is ideal for indoor flight or outdoor flight in calm conditions.

 


 

 

Key Features
100% ready to fly straight out of the box (PTF version requires a Hitec red transmitter).
Semi-scale color scheme replicating Rickenbacker’s 94th Aero Squadron aircraft.
Micro size and light weight make it ideal for indoor spaces.
Fully proportional throttle elevator and rudder control for exceptional maneuverability.
Lightweight 1S LiPo flight battery attaches with magnets.
Intermediate and expert pilots will enjoy the SPAD’s delightful performance.
Crisp scale features include exhaust propeller undercarriage strut and panel detailing.
Low speed characteristics mean the S.XIII is ideal for smaller flying sites.
Superb duration and low speed characteristics.


pdf

 


Manual

Download the Alara Manual Here

 

 

 



Specification

Wingspan (mm): 400
Length (mm): 310
Wing area (sq. in): 87
Weight (g): 29

 

What's in the box

1 x 100% factory assembled SPAD S.XIII.

1 x 3.7V 1S 70mAh LiPo battery.

1 x Quick-start guide.

1 x 4-channel Hitec Red enabled Tx with 1S LiPo charger. (RTF Version Only)

 

To Purchase

deal 2

AresSpad PTF (Pair To Fly)
AZSA3201
Ares Spad Ready to Pair to your Hitec Red Transmitter

 

.

 

 

 

£
Quantity
deal 2

AresSpad PTF (Ready To Fly)
AZSA3200
Ares Spad Ready to Fly complete with Hitec Red Transmitter

 

.

 

 

 

£
Quantity