browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Spare Motor Shafts

The spare motor shafts below are designed as replacements for the Airtek range of brushless outrunners (Both the old 'Apex' and the 'Apex Pro' Series). However as these are common sizes many may fit other makes of motor.
The sizes are displayed in the boxes below.

Shafts for Airtek Apex Pro Series

Shaft for Airtek APEX Pro Series 2822 Motors
2822APS

Spare shaft fits all Airtek APEX Pro 2822 series brushless outrunners.

37mm x 3.175mm

Quantity
£

Shaft for Airtek APEX Pro Series 2826 and 2830 Motors 282630APS

Spare shaft fits all Airtek APEX Pro 2826 and 2830 series brushless outrunners.

41mm x 3.175mm

Quantity
£

Shaft for Airtek APEX Pro Series 2836
2836APS

Spare shaft fits all Airtek APEX Pro 2836 series brushless outrunners.

49mm x 4.0mm

Quantity
£

Shaft for Airtek APEX Pro Series 3536
3536APS

Spare shaft fits all Airtek APEX Pro 3536 series brushless outrunners.

53.5mm x 5.0mm

Quantity
£

Shaft for Airtek APEX Pro Series 3542
3542APS

Spare shaft fits all Airtek APEX Pro 3542 series brushless outrunners.

59.5mm x 5.0mm

Quantity
£

Shaft for Airtek APEX Pro Series 3548
3548APS

Spare shaft fits all Airtek APEX Pro 3548 series brushless outrunners.

65.5mm x 5.0mm

Quantity
£

Shaft for Airtek APEX Pro Series 4250
4250APS

Spare shaft fits all Airtek APEX Pro 4250 series brushless outrunners.

71mm x 5.0mm

Quantity
£
Shafts for Old Airtek Apex Series

Shaft for Airtek APEX Series 2822 Motors with Circlip 2822AXS

Spare shaft fits all Airtek APEX 2822 series brushless outrunners.

37mm x 3.175mm

Quantity
£

Shaft for Airtek APEX Series 2826 Motors with Circlip 2826AXS

Spare shaft fits all Airtek APEX 2826 series brushless outrunners.

41mm x 3.175mm

Quantity
£

Shaft for Airtek APEX Series 2836 Motors with Circlip 2836AXS

Spare shaft fits all Airtek APEX 2836 series brushless outrunners.

49mm x 4.0mm

Quantity
£

Shaft for Airtek APEX Series 3536 Motors with Circlip 3536AXS

Spare shaft fits all Airtek APEX 3536 series brushless outrunners.

53.5mm x 5.0mm

Quantity
£

Shaft for Airtek APEX Series 3542 Motors with Circlip 3542AXS

Spare shaft fits all Airtek APEX 3542 series brushless outrunners.

59.5mm x 5.0mm

Quantity
£

Shaft for Airtek APEX Series 3548 Motors with Circlip 3548AXS

Spare shaft fits all Airtek APEX 3548 series brushless outrunners.

65.5mm x 5.0mm

Quantity
£

Shaft for Airtek APEX Series 4250 Motors with Circlip 4250AXS

Spare shaft fits all Airtek APEX 4250 series brushless outrunners.

71mm x 5.0mm

Quantity
£
Circlips

Generic Circlips to fit most grooved bushless motor shafts. Please note that groove height can vary between manufacturers, these clips fit the motors we sell but there may be small variations when used with other manufacturers motor shafts. All circlips are supplies in a pack of 3.

Circlip for 3.175mm Shafts BMC01

Supplied in pack of three.

Quantity
£

Circlip for 4.0mm Shafts BMC02

Supplied in pack of three.

Quantity
£

Circlip for 5.0mm Shafts BMC03

Supplied in pack of three.

Quantity
£