browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc

High Precision Servo Tester

tester

 

 

 

£

 

 

Quantity: 

Allows the user to test and exercise servos and set up a model without requiring the use of a transmitter and receiver.
The Servo Tester allows the user to control a servo directly, to determine its neutral position and to
cycle it automatically for break-in and testing, and offers small size, low power, high reliability and easy operation.
It is easy to use, practical and can test most parameters that interest users.
Controlled by an SCM for good stability and high accuracy.
The Servo Tester is adaptable to different power sources: it can use a four-cell dry battery, NiCd or
NiMH pack; or it can be connected directly to a UBEC or ESC.

Specification
bullet Input: DC 4.8 to 6.0V
bullet Output signal: 1.5ms±0.5ms
bullet Size: 16.5×32×0.98mm.
bullet Weight: 3.8g (0.14 oz)
bullet Adjustment methods: manual, neutral, automatic.