browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Plywood
IMPORTANT NOTE REGARDING ORDERING:
Plywood and other materials can be difficult to post due to their size and fragile nature. Please ensure you order a sensible amount or combine with another long item so we can make a practical parcel. For instance it is impractical to post just one thin plywood sheet! If you are unsure or have any questions please contact us, we will be glad to help.

We stock both Finnish Birch Plywood and Lite Ply. Please see below for further details on these materials.

Finnish Birch (Hard) Plywood

Finnish Birch Plywood has been the modellers standard for many years. A hard, smooth aviation quality resin bonded plywood which is ideal for modellers requirements. Extremely tough and easy to finish, use it for high stress areas such as doublers, root ribs firewalls etc. A superb material!

1/64" x 36" x 6" ( 0.4 x 910 x 150mm approx)

Finnish Birch Ply (Miralite)
PL007
A smooth, hard aviation grade plywood for the modeller.

Please see ordering details above.

Quantity
£

1/32" x 36" x 6" ( 0.8 x 910 x 150mm approx)

Finnish Birch Ply
PL006
A smooth, hard aviation grade plywood for the modeller.

Please see ordering details above.

Quantity
£

1/16" x 36" x 6" ( 1.5 x 910 x 150mm approx)

Finnish Birch Ply
PL001
A smooth, hard aviation grade plywood for the modeller.

Please see ordering details above.

Quantity
£

1/8" x 36" x 6" ( 3.0 x 910 x 150mm approx)

Finnish Birch Ply
PL002
A smooth, hard aviation grade plywood for the modeller.

Please see ordering details above.

Quantity
£

1/4" x 36" x 6" ( 6.5 x 910 x 150mm approx)

Finnish Birch Ply
PL003
A smooth, hard aviation grade plywood for the modeller.

Please see ordering details above.

Quantity
£

Lite Ply

Lite ply will be familiar to many modellers as the material used by a lot of ARTF manufactures. Not as strong as Finnish Birch but much lighter, therefore more suited to use in lower stress areas.

3/32" x 36" x 6" ( 2.0 x 910 x 150mm approx)

Lite Ply
PL004
A lightweight easily worked plywood for use in low stress areas.

Quantity
£

1/8" x 36" x 6" ( 3.0 x 910 x 150mm approx)

Lite Ply
PL005
A lightweight easily worked plywood for use in low stress areas.

Quantity
£

1/4" x 36" x 6" ( 3.0 x 910 x 150mm approx)

Lite Ply
PL008
A lightweight easily worked plywood for use in low stress areas.

Quantity
£