browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Pliers and Cutters
switch

Expo Flat Nose Pliers (Box Joint)
TO26
A handy set of flat nose pliers useful to the R/C Modeller for a myriad of light to medium applications.
The large flat inner surface is great for lightweight wire bending, and the smooth face minimises damage and marking of the material.



£
Quantity
switch

Expo Snipe Nose Pliers (Box Joint)
TO27
Classic Snipe Nose pliers that deserve a place in every modellers workshop and field box.

Being an Expo tool quality is guaranteed!

 

 



£
Quantity
switch

Expo Side Cutters 4/1/2"
TO28
An extremely useful tool for cutting and stripping of wire etc. Nice and lightweight and manufactured from forged steel, these will last a lifetime if looked after.
A must have!

 

 



£
Quantity
switch

Z-Bend Pliers
TO40
Used for shaping 'Z' bends in pushrods for control horn/servo horn retention. If you have tried doing this with ordinary pliers you will understand how difficult this can be! With the 'Z' bend pliers you will be producing linkage bends simply and accurately time and time again. An indispensable tool which once you use them you will wonder how you ever managed without!

 

 



£
Quantity
switch

Small Stainless Scissors with Micro Teeth
TO53
Featuring an extremely sharp serrated edge (micro teeth) allowing the scissors to grab the material as it cuts it. The blades and pivot are made from quality stainless steel for maximum strength. The handles are coated in a tough coating for maximum comfort. great for cutting ABS mouldings, fabric covering and a multitude of modelling tasks.

£
Quantity
switch

Large Stainless Scissors with Micro Teeth & Wire Stripers TO54
Featuring an extremely sharp serrated edge (micro teeth) allowing them to grab the material as it cuts it and one blade has recesses cut in the base allowing you to use them as wire strippers. The blades and pivot are made from quality stainless steel for maximum strength so the scissors do not flex under use. So handy!

£
Quantity