browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Multiplex Safety Switch 6HV

optima7

 

 

 

£

 

 

Quantity: 

MULTIPLEX SAFETY-SWITCH High Voltage (HV) switch harnesses are the ideal solution for the safety-conscious model pilot. The receiver battery (4 - 6 NiXX cells or 2S LiXX) is connected directly to the SAFETY-SWITCH circuit board. The actual switching function is carried out by reliable, high-performance FETs which are immune to vibration; they also feature very low internal resistance for ultra-low power losses.
A conventional mechanical slide-switch acts as the ON / OFF switching element; this makes it easy to see the operational status of the circuit. However, if a fault occurs in the slide-switch or its connecting leads, the electronic circuit always maintains the last active switched state (i.e. ON or OFF). This means that the receiver power supply circuit remains switched on even if the switch lead comes adrift in the air (e.g. due to vibration), i.e. the receiving system continues to function. If you use one of the TwinBatt types in conjunction with a telemetry-capable M-LINK receiver, both receiver battery voltages can be monitored at the transmitter.
The plus-points:
bullet Small and light, suitable for many applications
bullet Compatible with 2S LiXX batteries, no parts subject to wear
bullet Modern SMT construction for total immunity to vibration
bullet 6 A / 12 A continuous load capacity
bullet High-quality gold-plated connectors and large conductor cross-sections for maximum contact security and minimal transfer resistance)


SAFETY-SWITCH 6 HV
The MULTIPLEX SAFETY-SWITCH 6 HV represents the safe, low-cost alternative to conventional switch harnesses.
The plus-points:
bullet Small and light, suitable for many applications
bullet Compatible with 2S LiXX batteries, no parts subject to wear
bullet Modern SMT construction for total immunity to vibration
bullet 6 A continuous load capacity


Specification

Cell count: 4 - 6 NiXX / 2S LiXX
Continuous current: max. 6 A
Idle current (OFF): approx. 250 mA
Receiver connector: 1 x UNI
Cable cross-section: 0.33 mm²
Length: approx. 200 mm
Battery connectors: MPX MP-RC
Dims. (L x W x H): 38 x 28 x 6
Weight (incl. Leads):

 




Want to know more - Download the manual!

Click the image on the left to download the full manual for the Multiplex GPS Unit