browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc

Miscellaneous Fittings

prop

M4 x 40mm Nylon Wing Fixing Bolt (Pack of 4) ASHM64
Handy replacement Nylon Wing Fixing Bolts, nice and long so you can cut them down if desired. Designed to shear in the event of an 'arrival' saving a lot of damage to your model!

Quantity
£
prop

M5 x 40mm Nylon Wing Fixing Bolt (Pack of 4) ASHM82
Handy replacement Nylon Wing Fixing Bolts, nice and long so you can cut them down if desired. Designed to shear in the event of an 'arrival' saving a lot of damage to your model!

Quantity
£
prop

M5 x 40mm Nylon Wing Fixing Bolt and 'T' Retaining Nuts(Pack of 2 Sets) ASHM65
2 sets of Nylon M5 Shear Bolts and matching 'T' captive nuts for wing retention.

Quantity
£
prop

M6 x 50mm Nylon Wing Fixing Bolt (Pack of 2) ASHM66
Handy replacement Nylon Wing Fixing Bolts, nice and long so you can cut them down if desired. Designed to shear in the event of an 'arrival' saving a lot of damage to your model!

Quantity
£
prop

M5 x 20mm Hand Driven Bolts (Pack of 4) ASHM01
Hand driven plastic screws with a variety of uses.
Commonly used to hold plug in wing panels in place and a great replacement for those from your ARTF which have cross threaded!

Quantity
£
prop

M4 x 15mm Hand Driven Bolts (Pack of 4) ASHM02
Hand driven plastic screws with a variety of uses.
Commonly used to hold plug in wing panels in place and a great replacement for those from your ARTF which have cross threaded!

Quantity
£
prop

M6 x 24mm Hand Driven Bolts (Pack of 4) ASHM03
Hand driven plastic screws with a variety of uses.
Commonly used to hold plug in wing panels in place and a great replacement for those from your ARTF which have cross threaded!

Quantity
£
prop

M6 x 50mm Hand Driven Bolts (Pack of 2) ASHM107
Extra long, extra strong M6 wing bolts which are hand driven with a generous holding area. Not quite as elegant as the slotted ones but you won't get the screwdriver slipping and punching the covering as you don't use one!

Quantity
£
prop

Cowl Mounting Brackets (Pack of 8) ASHM81
Handy polypropelene cowl mounting brackets designed for self tapping screws.

No doubt modellers will find many more uses for them!

Quantity
£
prop

Saddle Clamps for single 8SWG Wire (Pack of 4) ASHM67
Saddle Clamp typically used for undercarriage wire retention, also has other uses for cabane wires etc. Designed to fit over a single 8 swg wire. Supplied 4 per pack.

Quantity
£
prop

Saddle Clamps for double 8SWG Wire (Pack of 4) ASHM68
Saddle Clamp typically used for undercarriage wire retention, also has other uses for cabane wires etc. Designed to fit over two 8 swg wires side by side. Supplied 4 per pack.

Quantity
£
prop

Saddle Clamps for single 10SWG Wire (Pack of 4) ASHM69
Saddle Clamp typically used for undercarriage wire retention, also has other uses for cabane wires etc. Designed to fit over a single 10 swg wire. Supplied 4 per pack.

Quantity
£
prop

Saddle Clamps for double 10SWG Wire (Pack of 4) ASHM70
Saddle Clamp typically used for undercarriage wire retention, also has other uses for cabane wires etc. Designed to fit over two 10 swg wires side by side. Supplied 4 per pack.

Quantity
£
prop

Saddle Clamps for single 12SWG Wire (Pack of 4) ASHM95
Saddle Clamp typically used for undercarriage wire retention, also has other uses for cabane wires etc. Designed to fit over a single 12 swg wire. Supplied 4 per pack.

Quantity
£
prop

Du-Bro Steel Undercarriage Clamps ASHM88
Ultra strong steel landing gear clamps. Ideal for fully recessed undercarriage wires but can also be bent for non recessed wires. Distance between mounting holes 13mm. Supplied in pack of 4 with 8 x retaining screws.

Quantity
£
prop

Wing Tip/Tail Skids SMALL (Pack of 2) ASHM83
Really neat, tough, skids for use on wing tips or as a tail skid. Easy to fit, simply drill 2 holes then epoxy or cyno in place.

SMALL - 30mm long x 10mm high. Available in 4 sizes.

Quantity
£
prop

Wing Tip/Tail Skids MEDIUM (Pack of 2) ASHM84
Really neat, tough, skids for use on wing tips or as a tail skid. Easy to fit, simply drill 2 holes then epoxy or cyno in place.

MEDIUM - 40mm long x 14mm high. Available in 4 sizes.

Quantity
£
prop

Wing Tip/Tail Skids LARGE (Pack of 2) ASHM85
Really neat, tough, skids for use on wing tips or as a tail skid. Easy to fit, simply drill 2 holes then epoxy or cyno in place.

LARGE - 50mm long x 18mm high. Available in 4 sizes.

Quantity
£
prop

Wing Tip/Tail Skids EXTRA LARGE (Pack of 2) ASHM86
Really neat, tough, skids for use on wing tips or as a tail skid. Easy to fit, simply drill 2 holes then epoxy or cyno in place.

EXTRA LARGE - 60mm long x 22mm high. Available in 4 sizes.

Quantity
£
prop

5x3x20mm Aileron Torque Rod Tube Bearing for 4mm wire (Pack of 4) ASHM05
Lots of other uses as well. Tough, moulded nylon with ribbed mounting flat for that extra grip.

Quantity
£
prop

Bell Crank 180deg (Pack of 2)
ASHM108
A really useful Bell Crank 180deg with screws and plastic bearings for pushrod transfer etc.

Quantity
£
prop

M2 Threaded Rod (Each) ASHM36
M2 threaded rod for making up your own pushrods etc. 8inch (200mm approx long).
Packed singles

Quantity
£
prop

M3 Threaded Rod (Each) ASHM36
M3 threaded rod for making up your own pushrods etc. 12inch (300mm approx long).
Packed singles

Quantity
£
prop

Micro Wing Servo Mounts (2 per pack) ASHM71
Wing servo mounts for micro servos. Will take servos up to - 30 x 30 x 16mm. Integrated cover has a streamlined pushrod exit. A very simple and extremely neat solution for wing servo mounting in smaller models.

Quantity
£
prop

Standard Wing Servo Mounts (2 per pack) ASHM101
Wing servo mounts for Standard servos. Will take servos up to -42 x 40 x 20mm. Integrated cover has a streamlined pushrod exit. A very simple and extremely neat solution for wing servo mounting.

Quantity
£
prop

Wheel Collets (x4) for 14SWG (2mm) wire/axles
ASHM102
Super quality brass wheel collets supplied in a pack of 4 with grub screws and matching allen key.

Quantity
£
prop

Wheel Collets (x4) for 12SWG (2.5mm) wire/axles
ASHM103
Super quality brass wheel collets supplied in a pack of 4 with grub screws and matching allen key.

Quantity
£
prop

Wheel Collets (x4) for 10SWG (3mm) wire/axles
ASHM104
Super quality brass wheel collets supplied in a pack of 4 with grub screws and matching allen key.

Quantity
£
prop

Wheel Collets (x4) for 8SWG (4mm) wire/axles
ASHM105
Super quality brass wheel collets supplied in a pack of 4 with grub screws and matching allen key.

Quantity
£
prop

Wheel Collets (x4) for 6SWG (5mm) wire/axles
ASHM106
Super quality brass wheel collets supplied in a pack of 4 with grub screws and matching allen key.

Quantity
£
prop

Self Adhesive Balance Weights ASHM42
Lead free weights designed for easy application and offer a great finish to wherever needed. Because these weights have a great smooth finish its possible to piggyback onto them selves. Pre-cut into easy use 5 & 10g segments.

Quantity
£
prop

Hatch Catch ASHM42
A Robust fastening for hatches etc. Has a 'snap shut' action & 1/4 turn 'pop up' opening. Complete with a moulded washer.and fixing screws. 2 per Pkt

Quantity
£
prop

Dubro Micro Hatch Latch System

5513925 A low profile design with a small spring-locking latch suitable for any doors, hatches, panels, etc. The Hatch Latch is secured in place using CA (cyanoacrylate). The unit is 1 long x 3/8 wide. Can be painted.1 per pkg. (0.75g)

Quantity
£
prop

Dubro E/Z Cowl Fixing System - .20-.90 size models

5513998 The E/Z Mount Cowl System provides an easy method of mounting your cowl. It's shock absorbing bushings will also reduce vibration and protect your painted surface from being marred. The E/Z Mount Cowl System is also adjustable and comes complete with all the hardware needed. 6 pieces per packet for larger. For .20 - .90 size models.

Quantity
£
prop

Dubro E/Z Cowl Fixing System - .90 plus size models

5513999 The E/Z Mount Cowl System provides an easy method of mounting your cowl. It's shock absorbing bushings will also reduce vibration and protect your painted surface from being marred. The E/Z Mount Cowl System is also adjustable and comes complete with all the hardware needed. 6 pieces per packet for larger. For .90 plus size models.

Quantity
£
prop

Glider Tow Hook
ASHM87
Tough glider belly tow hook moulded from high grade nylon incldues 4 x nuts and bolts for mounting.

Quantity
£
prop

Wing Seat Tape 1/4" (6mm) ASHM46
1.5mm x 6mm x 300mm wing seat tape to provide an airtight seal between the wing and fuselage wing seat. Just the right thickness and density to allow for those less than perfect fits!

Quantity
£
prop

Wing Seat Tape 1/2" (12mm) ASHM47
1.5mm x 12mm x 300mm wing seat tape to provide an airtight seal between the wing and fuselage wing seat. Just the right thickness and density to allow for those less than perfect fits!

Quantity
£