browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Miscellaneous Adhesives
switch

Z-Poxy 5-Min 8oz Epoxy poly bottles
ADH50
The popular 5 minute Z-Poxy is now available in economical 8oz bottles.

Indispensable for building/repairs where a strong, fuel proof joint is required.

Seals tight after use for leak proof storage.

Metal, Wood, Balsa, Ply, Rubber, Aluminium, and many other materials.

 

£
Quantity
switch

Z-Poxy 30-Min 8oz Epoxy poly bottles
ADH51
The popular 30 minute Z-Poxy is now available in economical 8oz bottles.

Indispensable for building/repairs where a strong, fuel proof joint is required.

Seals tight after use for leak proof storage.

Metal, Wood, Balsa, Ply, Rubber, Aluminium, and many other materials.

 

£
Quantity
switch

Z-Poxy 5 minute Quick Shoot Epoxy 28g ADH9
5 minute quick setting Epoxy adhesive, comes in a handy convenient to use twin tube dispenser.
Indispensable for building/repairs where a strong, fuel proof joint is required.

Seals tight after use for leak proof storage.

Metal, Wood, Balsa, Ply, Rubber, Aluminium, and many other materials.

 

£
Quantity
switch

Devcon 30 Minute 2 Ton Epoxy 28g Quick Shoot

ADH25
Higher Strength, slower setting epoxy.
30 minute setting time, 2 hours to full cure. Joint is capable of lifting 2 tons! Great for high stress areas such as firewalls etc.
Spend a few pennies more and get the best - Devcon!

 

£
Quantity
switch

Z-POXY Finishing Resin 12oz

ADH45
An odorless, clear, non-brittle finishing resin that sands easily to a super smooth finish ready for priming and painting. Great for applying Fibreglass cloth, mat and tissue. Laminates wood and foam.

Working time of 20 to 30 minutes and cures in 3 hours.

 

£
Quantity
switch

JP Super Filler 100ml

ADH30
A superior quality, ultra lightweight wood grain and general filler. It's ready mixed, quick drying and easy to sand. No catalyst required! Super Filler's cream colour matches well to most aero modelling woods, but its colour can be easily altered using water-based dyes. It can be thinned with water and brushed on to fill wood grain. Super stuff!

 

£
Quantity
switch

Deluxe Materials Model Lite Lightweight Filler Balsa Tint 240ml

ADH53
Model Lite is a hyper lightweight ready to use filler which sands easily for brilliant results. Specially formulated for modellers with a blasa tint when sanded back this filler virtually dissapears against balsa.

Supplied in a giant 240ml tub.

 

 

 

 

£
Quantity
switch

JP Super Filler 250ml

ADH30
Same as above but in a budget giant 750ml tub for those that do a lot of building!

 

 

 

 

£
Quantity
switch

Z-POXY Finishing Resin 4oz

ADH31
As above but in a smaller 4oz pack.

An odorless, clear, non-brittle finishing resin that sands easily to a super smooth finish ready for priming and painting. Great for applying Fibreglass cloth, mat and tissue. Laminates wood and foam.

Working time of 20 to 30 minutes and cures in 3 hours.

 

£
Quantity
switch

Deluxe Materials Super-Phatic! - 50ml ADH46
Super ‘Phatic! is a great economical alternative to thin superglue. Because it is non fuming, it can be used safely by anyone experiencing a reaction to superglue. Super Phatic! is best for tight fitting joints between wood, foam, carbon fibre, plastic and fiberglass etc. Furthermore, Super'Phatic! will keep flowing into joints where other glues would set. There is no odour either!

£
Quantity
switch

Clear Silicone Sealer 1.5fl oz tube

ADH64
A single component silicone adhesive
Remains clear and waterproof after cure.

Lots of modelling uses, seals bonds and remains flexible.

£
Quantity
switch

Fibreglass Surface Tissue
36 x 36 inch

ADH32
A fine fibreglass surface tissue ideal for use with Z Poxy finishing resin above.

Adds a tough hard wearing surface to balsa, plywood etc, and can be used for local joint reinforcement.

A very versatile material.

£
Quantity
switch

Grip Aliphatic Wood Glue 100g

ADH36
Outperforms traditional white glues with it's super fast grab time and superior sanding qualities. Useful for joining aircraft cowling blocks, wing skins, fuselage or hull planking. In fact, it is useful for any joints where the glue line needs to be carved or sanded afterwards. The glue joint will not show.

£
Quantity
switch

Deluxe Materials Speedbond PVA Adhesive 112g (4oz)
ADH15
Speed Bond is general purpose, fast setting PVA type white wood glue for general modelling uses. It dries to a semi-flexible condition with high strength and is fairly clear in appearance.

Beware of cheaper PVA adhesiveswith low grade fillers, this is specially formulated for modellers - the best!

 

£
Quantity
switch

Deluxe Materials Aliphatic Rapid Resin 112g (4oz)
ADH16
Outperforms traditional white glues with it's super fast grab time and superior sanding qualities. Useful for joining aircraft cowling blocks, wing skins, fuselage or hull planking. In fact, it is useful for any joints where the glue line needs to be carved or sanded afterwards. The glue joint will not show.

 

£
Quantity
switch

Deluxe Materials Tissue Paste
ADH37
Formulated paste for bonding tissue used on traditional model aeroplanes.The formulation allows delicate tissue paper to be placed onto airframes and smoothed without tearing. Dries clear.

We also stock traditional covering tissue which you can find here.

 

£
Quantity
switch

Deluxe Materials Cover Grip
ADH38
Enhances film adhesion between model airplane structures and the film itself, thus reducing and preventing film lift. It bonds covering to balsa, foam, plywood etc.
The new formula dries non tacky but is instantly activated with a hot iron at normal temperatures. Use Cover-Grip on film edges round engine bays to bond loose covering film and trim. 150ml pack.

 

£
Quantity
switch

Deluxe Materials Foam 2 Foam 50ml
ADH47
A high-tack glue specially designed for the latest generation of foam aircraft. It bonds Depron, white, blue and EPS foams, wood and plastic. Dries clear and flexible. Flyers report that joints made with Foam 2 Foam are more resilient than other types of glues including foam safe cyano acrylate and as a consequence their models often survive mid air crashes.

£
Quantity
switch

Deluxe Materials Foam Armour
ADH48
A thick water based resin that sets to produce an attractive, durable, scratch resistant coating on foam to prevent dings, wear & disintegration. It dries to a surface that can be painted & glued easily and will reduce damage. 250ml bottle covers 0.7 sqm.

Creates a hard durable surface layer on foam and wood and is easily glued and worked.

 

£
Quantity
switch

UHU POR Foam Friendly Glue 40ml
ADH11
UHU POR is an elastic, waterproof contact adhesive for instant bonding of expanded polystyrene to itself, wood and many plastics, metals, paper and card.

Indispensable for the assembly of 'Foamies' and Depron constructed models.
The adhesive of choice for many modellers using these materials.

£
Quantity
switch

DUR Balsa Cement
ADH11
Yes - Balsa Cement!
Introduced to our range by popular demand the old faithful balsa cement still has quite a following in this age of modern adhesives. And why not? Dries clear and gives a clean strong joint - great for sheeting!

Supplied in a giant 75ml tube.

£
Quantity
switch

Supalight Micro Balloons 250ml
ADH26
A lightweight powder that is compatible with all types of resins. Use for a wide variety of aeromodelling uses, wing fillets, scale bumps & blisters etc. They are also insoluble in water, which makes them perfect for marine applications. Use as a gap filler, whilst using thin cyano glues & resins & for building fillets or lightweight model features from resins.

£
Quantity
switch

Thread Locker Blue, Medium Strength 0.2oz bottle
ADH12
Medium strength thread locker, seals nuts and bolts against vibration and yet allows easy dissassembly with hand tools.

Works best on most metals and aluminium.

Thread Locker Red is also available for more permanent locking.

£
Quantity
switch

Thread Locker Red (Permanent) 0.2oz bottle
ADH13
Permanent strength, locks and seals metal nuts, bolts and studs. Holds from -65 degrees F to 300 degrees F.
Resistant to petrol and oil etc.
Thread Locker Blue is also available where future disassembly may be required.

£
Quantity
switch

Formula 560 Canopy Glue
ADH10
The worlds best canopy glue, specially formulated for what is always a difficult job. Works on all materials and dries clear, no more stains on your crystal clear canopy.

Also works as a general adhesive for other materials such as Metal, Wood, Rubber, Most plastics, China, Pottery.

£
Quantity
switch

Prohinge Hinge Glue (30ml)
ADH27
Prohinge does exactly what it says on the bottle - sticks hinges!

For use with - Hairy-Barbed-Flat and pin types of Hinges. If you are fed up with tin cyno running and ruining your covering this is the stuff to use.

Instant grab and fully cured in 24 hours.

£
Quantity