browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Lipo Accessories
checker
£
Quantity

Lipo Charging and Storage Bag - Small

PCHM/03
Small size bag which will fit any size lipo for safe storage, transport and charging. Made from a fire retardant material with strong velcro holding the flap. Place your lipo in the bag, seal (ensuring the charging lead hangs out of the side) and charge.
Don't take the risk - always use a lipo safety bag, a small price to pay for safety and peace of mind.

Size:18(W) x22(H)cm

checker
£
Quantity

Lipo Charging and Storage Bag - Large

PCHM/02
Large size bag which will fit any size lipo for safe storage, transport and charging. Made from a fire retardant material with strong velcro holding the flap. Place your lipo in the bag, seal (ensuring the charging lead hangs out of the side) and charge.
Don't take the risk - always use a lipo safety bag, a small price to pay for safety and peace of mind.

Size:23(W) x30(H)cm

switch

Lipo Charging Bag Small

LSCB1
Fire proof bag to contain a single lipo whilst charging, and can also be used for storage. Made from a fire retardant material with strong velcro flap. Don't take the risk - always use a lipo safety bag

Size Small: 40 x 50 x 95mm

£
Quantity
switch

Lipo Charging Bag Medium

LSCB2
Fire proof bag to contain a single lipo whilst charging, and can also be used for storage. Made from a fire retardant material with strong velcro flap. Don't take the risk - always use a lipo safety bag

Size Medium: 40 x 50 x 120mm

£
Quantity
switch

Lipo Charging Bag Large

LSCB3
Fire proof bag to contain a single lipo whilst charging, and can also be used for storage. Made from a fire retardant material with strong velcro flap. Don't take the risk - always use a lipo safety bag

Size Medium: 60 x 60 x 170mm

£
Quantity
prop

JST Balance Lead Protection Case for 3 Cell Lipos Pack of 3 JSTP3
A handy protection case that snaps over the balance connector to prevent damage to the leads caused by frequent removal . For 3 cell lipos fitted with JST leads

Quantity
£
prop

JST Balance Lead Protection Case for 4 Cell Lipos Pack of 3 JSTP4
A handy protection case that snaps over the balance connector to prevent damage to the leads caused by frequent removal . For 4 cell lipos fitted with JST leads

Quantity
£
prop

JST Balance Lead Protection Case for 5 Cell Lipos Pack of 3 JSTP5
A handy protection case that snaps over the balance connector to prevent damage to the leads caused by frequent removal . For 5 cell lipos fitted with JST leads

Quantity
£
prop

JST Balance Lead Protection Case for 6 Cell Lipos Pack of 3 JSTP6
A handy protection case that snaps over the balance connector to prevent damage to the leads caused by frequent removal . For 6 cell lipos fitted with JST leads

Quantity
£