browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc

Control Surface Hinges

prop

Lightweight Coated Cyno Hinges x 10 ASHM100
Easy to use CA hinges. Place in the slot, apply a drop of thin cyno to the hinge line and your done!

Width: 20mm Length: 15mm. 10 pieces per packet.

Quantity
£
prop

Coated Mylar Cyno Hinges with Retaining Holes ASHM80
A very secure variation of the 'hairy mylar' cyno hinge featuring retaining holes to give good adhesive penetration.
26mm x 20mm Pack of 12

Quantity
£
prop

Moulded Lightweight Mylar Hinges ASHM99
Lightweight moulded hinge with a flexible hinge line. Features seffated edges for easy insertion and glue holes for maximim retention. L26 x W20 x H0.5 (mm). 4 per pack.

Quantity
£
prop

Super Light Micro Hinge Points (Pack of 5) ASHM111
Ultra light hinge points for small models with a flexible scored bearing point.
Produces very free moving surfaces.

Dia: 2mm Width: 8mm Length: 24mm

Quantity
£
prop

Super Light Hinge Points (Pack of 5, small) ASHM06
Barbed hinge points with a flat near the bearing and steel pin. Strong light & easy to fit - a neat alternative to cyno hinges. Produces very free moving surfaces.

Dia: 2.5mm Width: 8mm Length: 28mm

Quantity
£
prop

Super Light Hinge Points (Pack of 5, med) ASHM07
Barbed hinge points with a flat near the bearing and steel pin. Strong light & easy to fit - a neat alternative to cyno hinges. Produces very free moving surfaces.

Dia: 3mm Width: 10mm Length: 48mm

Quantity
£
prop

Super Light Hinge Points (Pack of 5, large) ASHM08
Barbed hinge points with a flat near the bearing and steel pin. Strong light & easy to fit - a neat alternative to cyno hinges. Produces very free moving surfaces.

Depth: 4.5m, Width: 12mm Length: 76mm

Quantity
£
prop

Super Strong Hinge Points (Pack of 5, small) ASHM09
Top Quality, very strong hinge points with riveted bearings. These won't give way in a hurry!
Produces very free moving surfaces.

Dia: 2mm Length: 33mm

Quantity
£
prop

Super Strong Hinge Points (Pack of 5, med) ASHM10
Top Quality, very strong hinge points with riveted bearings. These won't give way in a hurry!
Produces very free moving surfaces.

Dia: 2.5mm Length: 43mm

Quantity
£
prop

Super Strong Hinge Points (Pack of 5, large) ASHM11
Top Quality, very strong hinge points with riveted bearings. These won't give way in a hurry!
Produces very free moving surfaces.

Dia: 4.5mm Length: 67mm

Quantity
£
prop

Plastic Leaf Pin Hinges (Pack of 8 ) ASHM12
The classic hinge & still favoured by many - and why not they produce super free moving surfaces and are very strong for their weight. Pin is turned at the end so these won't fall out!

Width: 16mm Length: 28mm

Quantity
£
prop

Blenderm Hinge Tape 12.5mm TTV025
For hinging on indoor and small models Blenderm has fantastic adhesion and superb flexibility. Also makes a great control surface sealing tape for crisper response and improved aerodynamics. The best! Long 4.5mt roll 12.5mm wide.

Quantity
£
prop

Blenderm Hinge Tape 25mm TTV026
For hinging on indoor and small models Blenderm has fantastic adhesion and superb flexibility. Also makes a great control surface sealing tape for crisper response and improved aerodynamics. The best! Long 4.5mt roll 12.5mm wide.

Quantity
£
switch

Du-Bro Kwik Hinge Slotter
TO7
An indispensible tool for hinge slotting. works with all common hinges including hinge points. Simply place over the edge, slide the parallelagram and use the guide to cut a perfectley centred hinge slot - brilliant!
Please note this is for the SLOTTER ONLY, knife and drill shown for illustration purposes only.

£
Quantity