browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc

      The absolute pinnacle of the Graupner R/C range (which in itself makes it one of, if no the best, R/C sets money can buy) the MC-32 is a full 16ch systems simply bristling with features and quality.

       

      MC-32 Features

        Integrated Graupner HoTT 2.4 GHz transmission system
        Voice and music output via built-in speaker or headphone jack or Bluetooth® v2.1+ EDR
        Aluminium trim wheels
        Aluminium side rotary controls
        Aluminium joystick parts for rigid joystick mechanics with knurled joysticks and 3-function stick switches
        Simple and extremely fast binding with model-memory-dependent telemetry
        Range test and warning function
        Undervoltage warning
        Extremely wide receiver operating voltage range of 3.6 V to 8.4 V (functional up to 2.5 V)
        Fail-safe, free channel assignment (channel mapping), mixer functions and all servo settings are simple to program
        Binding of any number of receivers for channel expansion (32 channels maximum)
        Up to 7 servos can be controlled simultaneously as a block in a servo cycle time of 10 ms (digital servos only)
        Maximum noise immunity due to optimised frequency hopping and wider channel spread
        Intelligent data transfer including error correction
        Extremely fast rebinding, even at maximum distance
        Real-time telemetry evaluation in the transmitter display
        Additionally, telemetry data can also be selectively displayed by the SMART-BOX
        More than 200 systems can be used simultaneously
        The HoTT technique of bidirectional communication between transmitter and receiver, as well as the fastest possible transmission rate (10 ms), ensure extremely fast response times.
        Additional HoTT features of the mc-32:
        Super-fast response time through use of a fast main processor for data transmission
        Micro SD card for storage of telemetry data and for additional functions
        Update capability via USB interface or micro SD card guarantees future viability
        The LiIo battery supplied has a capacity of 6000 mAh, making extremely long flight times possible and reducing the number of charging processes.
        Wireless teacher/pupil system or can be connected to the DSC socket via a cable as an option
        Modulation changeover via software. This enables you to switch, e.g. from Weatronic (EXT. PPM) to HoTT at the touch of a button.
        Connections for the Weatronic module.
        iFS and Weatronic can be retrofitted.
        5 different languages (German, English, French, Spanish; Italian to follow) available via software update. For the availability of a given language, go to the Download area.
        80 model memories and other storage options on the µSD card
        8 switches/keys , including 2 x 3-position switches, 3 x 2-position switches, 2 long keys, 2 kill switches already installed
        Swashplate limiting: This function limits the swashplate’s tilt angle to prevent the potential for mechanical collision in helicopter 3D operation at full-limit roll and pitch axis
        Digital trimming by scroll wheel, can be set either for a specific flight phase or globally
        Zeroing of the digital trimming by simply pressing the scroll wheels
        Auto-trim function. The current joystick positions for trimming fixed-wing or helicopter models will be stored in trim memory at the touch of a button. (“Balance” model, activate switch and release joystick. The correction will be blended in “gently” upon return of the joystick.)
        C1 changeover, brake/elec. motor: This changeover can be implemented very easily via enhanced flight phase programming. The pilot determines the joystick position (forward/rear) at which the motor is to be switched off or the airbrakes are to be retracted.
        16 proportional control functions maximum
        Simplified arrangement of operating elements, such as joysticks, external switches, proportional controls and trim levers as control functions
        Protection against obsolescence is provided by virtue of a fast 32-bit operating system with modern flash memory that can be updated.
        Blue backlit MULTI-DATA-GRAPHIC LCD monitor with significantly better legibility under unfavourable light conditions
        CONVENIENT MODE SELECTOR for simple switchover of operating modes 1 - 4 (e.g. throttle left/throttle right)
        12 freely programmable mixers for wing or helicopter models, each with freely selectable input and output functions, including 4 curve mixers with innovative 8-point curve technology, easy to set and adjust curve values at up to 8 points for throttle, pitch, tail or other non-linear actuations. The processor in the CPU employs an ingenious method of calculating polynomial approximations for truly-rounded, ideal MPC (multi-point curve) mixer curves
        Shifting curve mixer points can be done along both axes with the rotary control
        8 flight-phase programs can be individually adapted for each model and given a name. The switchover time is programmable separately.
        SUPER SERVO menu with a perfect overview of all servo setting data and simple parameter correction for 4 “levels” (direction of rotation, mid-point setting, separate servo travel on both sides and separate travel limiting on both sides for 16 servos with a total of 96 possible settings)
        SUPER-DUAL-RATE, EXPO and EXPO/DUAL-RATE menu with 36 possible settings for 3 servo functions and 8 flight phases
        Highly practical multi-function menu for fixed-wing and helicopter models. Entry of the number of aileron and flap servos automatically programs all necessary mixer functions in the multi-function “Wing mixers” menu. Differential aileron mixer, butterfly mixer, dual-flap mixer, automatic gyro set function and other special functions
        Helicopter swashplate mixer for 1, 2, 3 or 4-point steering.
        Selectable cycle time: 10 ms, 20 ms, 30 ms or 40 ms, depending on receiver and operating mode
        A convenient timers menu with a system of 8 stopwatches, alarm timer, countdown timer, laps counter and so on. 2 running timers and 1 lap/running timer can be displayed at the same time in large characters.
        Stopwatch with history: in addition to the lap counter there is a time 1 which captures the ON time and a time 2 which records the ON and OFF times separately
        The transmitter’s operating time timer is automatically reset to zero by the battery charging process.
        Flight phase switch assignments: now 6 switches, 2 with priority function. Every switch combination can be named freely. This makes the number of flight phases independent of the number of flight phase switches.
        Linearising switchplate servos: electronic compensation for non-linear travel of swashplate rotary servos.
        Tail type normal, V-tail, Delta/flying-wing and 2 EL Sv 3+8 (which immediately makes 2 coupled elevator servos available without using free mixers or dual mixers)
        Flap count up to 4 AIL/4 FL: Full support of 8 wing servos, now even without use of free mixers.
        Flight phase switching delay, can be switched off: the delay time can be switched off for individual channels flight phase by flight phase (e.g. for motor off in electric models or to activate/deactivate helicopter head lock).
        16 phase names:.
        Fixed-wing mixer: New concept for the multi-flap menu to simplify settings of up to 8 wing servos on a flight-phase-specific basis in a comprehensible manner without requiring the use of free mixers.
        Number of flight phases: (fixed-wing: 8, helicopter: 7 + AR)
        Phase trim
        Switchable Snap-Flap mixer EL => FL with a new offset function for easy course corrections and fast turns
        3 ring limiters for Voith-Schneider and similar drives
        Logical switches
        Trim memory
        Multi-channel function to expand channels for up to 14 additional channels
        Channel sequencer for 3 channels for folding motors and landing gear doors
        Swapping of servo assignment at receiver output on transmitter side and receiver side


        Specification

      Aerial length [mm]: 110
      Operating voltage neutral [V]: 3,2 ... 4,8
      Width [mm]: 252
      Display?: Yes
      Flight phase: Yes
      Frequency: 2400 ... 2483,5
      All-up weight [g]: 1700
      Height [mm]: 60
      HoTT - Technology: Yes
      Channels: 16
      Overall length [mm]: 252
      Teacher- / student-system: Yes
      Micro SD: Yes
      Mixer: Yes
      Model memory: 80 + weitere auf Micro SD-Card
      Range approx. [m]: 4000
      Transmitter series: mc
      Transmitter type: Console
      Sound emission: Yes
      Voice output: Yes
      Language variant: GB
      Control function: 16
      Current consumption [mA]: ca. 750
      Telemetry capable: Yes
      Temperature range [°C]: -15 ... 55
      Touch Display: No
      USB connection: Yes

       

      Graupner/SJ HoTT Features
      Simple, extremely fast binding
      Range test and warning function
      Low-voltage warning
      Extremely broad receiver operating voltage range from 3.6V to 8.4V (functional to 2.5V)
      Fast response time if 10ms is set in PERIODD since four transmitter channels are received at once
      Failsafe, free channel allocation (channel mapping): mixer functions and all servo settings can be programmed simply on transmitter LCD by using telemetry function
      Binding of any number of receivers for channel expansion (max. of 32 channels)
      SUMD, SUMO functions ensure the convenient use of peripherals through gyro and control board
      Maximum immunity to interference through optimized frequency hopping and broad channel spread
      Intelligent data transmission with correction simultaneously
      Extremely fast rebinding, even at max. distance
      Telemetry analysis in real time
      Over 200 systems can be used simultaneously
      Future-proof through update capability via USB interface
      Graupner/SJ Firmware update through GR STUDIO PC Software

       

      Downloads


       

       

      To download the MC-32 Instruction manual click here

       

       

       

       



       

      To Purchase

      The MC-32 is supplied without a receiver and is available to purchase below:

       

      deal 2

      Graupner SJ MC-32 Transmitter, case and accessories.
      33032.77.EN

       

       

       

       

       

       

       

       

      £
      Quantity


       

IMPORTANT - PLEASE READ BEFORE ORDERING GRAUPNER ITEMS

Because Graupner have now moved their distribution base away from the UK to Germany there may be a slight delay in dispatching Graupner Products. Therefore please allow around 3 working days before your order is dispatched.
Servicing is still handled from the UK. Thank you.