browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc

The Graupner mc-26 HoTT is the model for that demand the very best in quality, style and performance. The mc-26 is suitable for almost all models, featuring16 control functions, 120 internal model memories, integrated telemetry and voice output as well as the fast and reliable bi-directional Graupner HoTT 2.4 GHz technology, it all makes the mc-26 a true all-rounder.

The mc-26 has an internal circular polarized patch antenna for phenomenal high range and reliability.
The control sticks, with double ball-bearing on each axle, ensure an optimal control feeling.
Two large, high-contrast displays inform you about telemetry data and parameters at all times and enables fast and easy programming.

The switches and buttons of the transmittercan be freely assigned and thus individually adapted. 12 mixers are available for programming. 8 Switch phase programs with announcement function can be adapted and named for each model.

Thanks to micro-SD card and micro USB interface, telemetry data and model memories can be imported and exported. Also upgrades of the firmware are carried out so uncomplicatedly.

 

MC-26 Features

    Microcomputer remote control set implemented with the very latest 2.4 GHz Graupner HoTT technology
    Ring limiter and channel sequencer
    Bidirectional communicationbetween transmitter and receiver
    Wireless T/P function
    6 different languages (German, English, French, Italian, Spanish and Dutch) available via software update. For the availability of a given language, go to the Download area.
    Storage of telemetry data with date and time
    Servo cycle times of 10 ms can be selected for digital servos
    Ultra-fast response times through direct and reliable transmission of data from the main processor to the 2.4-GHz transceiver. No additional delays due to detours via a module processor.
    Operating and programming are similar to the proven concepts implemented in the mx-24
    A high-contrast, blue-illuminated graphic display ensures perfect control of parameter settings such as model type, model memory, timers and operating voltage.
    16 control functions
    Free assignment of all switches
    120 model memories
    10 switches/keys, including two long 3-position switches, four 2-position switches, 2 long keys, 2 keys on the rear and 2 slider regulators as well as 2 side rotary controls
    Modes 1 to 4 freely selectable
    CAP TOUCH operating elements with key lock function to prevent unintentional operation.
    Numerous telemetry, programming and evaluation functions are presented directly on the transmitter’s screen
    Voice output can be called up via freely programmable switches
    Extensive programs for fixed-wing and helicopter models
    Swashplate limiter
    “Monitor” switch to check all switches and control switches
    12 freely programmable mixers for wing or helicopter models, each with freely selectable input and output functions, including 4 curve mixers with 5-point curve technology in 1% increments, resulting in curve values that are easy to set and adjust at up to 5 points for throttle, pitch, tail or other non-linear actuations. The processor in the CPU employs an ingenious method of calculating polynomial approximations for truly-rounded, ideal MPC (multi-point curve) mixer curves.
    8 flight-phase programs can be individually adapted for each model and given a name. The switchover time is programmable separately.
    SUPER SERVO menu with a perfect overview of all servo setting data and simple parameter correction for 4 “levels” (direction of rotation, mid-point setting, separate servo travel on both sides and separate travel limiting on both sides for 12 servos with a total of 72 possible settings)
    SUPER-DUAL-RATE, EXPO menu with 36 possible settings for 3 servo functions and 6 flight phases.
    Highly practical multi-function menu for fixed-wing and helicopter models. Entry of the number of aileron and flap servos automatically programs all necessary mixer functions in the multi-function “Wing mixers” menu. Differential aileron mixer, butterfly mixer, dual-flap mixer, automatic gyro set function and other special functions
    Helicopter swashplate mixer for 1, 2, 3, or 4-point steering.
    Fail-safe for 12 servo functions
    Convenient timers menu. Stopwatch system, alarm timer, countdown timer, laps counter, etc. Two timers and one lap counter/timer can be displayed at the same time.
    Stopwatch with history: in addition to the lap counter there is a time 1 which captures the ON time and a time 2 which records the ON and OFF times separately.
    The transmitter’s operating time timer is automatically reset to zero by the battery charging process.
    Flight phase switch assignments: now 6 switches, 2 with priority function. Every switch combination can be named freely. This makes the number of flight phases independent of the number of flight phase switches.
    Linearising switchplate servos: electronic compensation for non-linear travel of swashplate rotary servos.
    Tail type normal, V-tail, Delta/flying-wing and 2 EL Sv 3+8 (which immediately makes 2 coupled elevator servos available without using free mixers or dual mixers)
    Flap count up to 4 AIL/4 FL: Full support of 8 wing servos, now even without use of free mixers.
    Flight phase switching delay, can be switched off: the delay time can be switched off for individual channels flight phase by flight phase (e.g. for motor off in electric models or to activate/deactivate helicopter head lock).
    16 phase names
    Fixed-wing mixer: New concept for the multi-flap menu to simplify settings of up to 8 wing servos on a flight-phase-specific basis in a comprehensible manner without requiring the use of free mixers.
    Number of flight phases: (fixed-wing: 7, helicopter: 6 + AR)
    Phase trim
    Switchable Snap-Flap mixer EL => FL with a new offset function for easy course corrections and fast turns
    3 ring limiters for Voith-Schneider and similar drives
    Channel sequencer for 3 channels for folding motors and landing gear doors
    Logical switches
    Trim memory
    Multi-channel function to expand channels for up to 14 additional channels
    Music player and internal speaker for voice output and music
    Swapping of servo assignment at receiver output on transmitter side and receiver side
    PPM signal adjustable at the data output
    Model memories of the mx-20 can also be loaded directly into the mc-20. To do so, simply copy the model memories on the PC to the appropriate directory. Then the switches and controls must be newly assigned because of the different hardware.


    Specification

Antenna: Patch
Batteries or accumulators included / suggested: Y
Battery cell type: Lithium-Ion
Operating voltage neutral [V]: 3,4 ...4,35
Width [mm]: 228
Display?: Yes
Flight phase: Yes
Frequency: 2400 ... 2484,5
All-up weight [g]: 1250
Height [mm]: 66
HoTT - Technology: Yes
Channels: 16
Overall length [mm]: 235
Micro SD: Yes
Range approx. [m]: ~3000
Transmitter series: mc
Transmitter type: Console
Voice output: Yes
Language variant: DE
Control function: 16
Current consumption [mA]: 400
Temperature range [°C]: -15 ... 55
Touch Display: No
USB connection: Yes

 

Graupner/SJ HoTT Features
Simple, extremely fast binding
Range test and warning function
Low-voltage warning
Extremely broad receiver operating voltage range from 3.6V to 8.4V (functional to 2.5V)
Fast response time if 10ms is set in PERIODD since four transmitter channels are received at once
Failsafe, free channel allocation (channel mapping): mixer functions and all servo settings can be programmed simply on transmitter LCD by using telemetry function
Binding of any number of receivers for channel expansion (max. of 32 channels)
SUMD, SUMO functions ensure the convenient use of peripherals through gyro and control board
Maximum immunity to interference through optimized frequency hopping and broad channel spread
Intelligent data transmission with correction simultaneously
Extremely fast rebinding, even at max. distance
Telemetry analysis in real time
Over 200 systems can be used simultaneously
Future-proof through update capability via USB interface
Graupner/SJ Firmware update through GR STUDIO PC Software

 

Downloads


 

 

To download the MC-26 Instruction manual click here

 

 

 

 

 


 

 

To download the MC-26 Programming manual click here

 

 

 


 

    The set Contains
  • Graupner HoTT mc-26 microcomputer telemetry transmitter with built-in LiPo 4000 mAh transmitter battery
    Graupner HoTT GR-24 Reveiver (combo version only)
    Update cable
    µSD card
    Aluminium case
    Hand rests
    Neck strap
    Short and long joystick
    Transmitter strap (strap:55% polyester, 45% acrylic
    Neck pad: 65% polyester, 35% acrylic

 

To Purchase

The MC-26 is available as a transmitter only, as a combo with the GR-24 Receiver.
Please choose your option below.

 

deal 2

Graupner SJ MC-26 Transmitter Only
S1036.77
Transmitter only with all the features of the combo below minus the receiver.

A great choice if you are upgrading and want to use your existing Graupner receivers, or prefer to purchase a different receiver than the one in the combo.

 

 

 

£
Quantity
deal 2

Graupner SJ MC-26 Combo with GR-24 Receiver
S1036
Full MC-26 Combo with contents as described above.

 

 

 

 

 

 

 

£
Quantity


 

IMPORTANT - PLEASE READ BEFORE ORDERING GRAUPNER ITEMS

Because Graupner have now moved their distribution base away from the UK to Germany there may be a slight delay in dispatching Graupner Products. Therefore please allow around 3 working days before your order is dispatched.
Servicing is still handled from the UK. Thank you.