tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
ZTW Gecko Series 2-6S SBEC 85A Electric Speed Controller

If you want the best, the very best ESC for your demanding applications then look no further than the ZTW 'Gecko' series. Supeb build quality with finned andodised aluminium body with lightweight end caps, and legendery ZTW bullet proof reliability makes the 'Gecko' series the ESC of choice for those that want the very best.

Additional features include safe power arming along with advanced programmable, data logging system, low voltage cutoff, braking, timing, throttle input range, and more, making this series truly a pro series speed control.

The Switch-Mode BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher current applications to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters and complicated fixed wing models.

This ESC features a huge 8A SBEC output with adjustable voltage of either 5.0v, 6.0v, 7.4v or 8.4v - at last an ESC than can handle high voltage servos without the need for a seperate regulator!


bullet Brake Setting Soft medium or hard
bullet Battery Type setting (LiPo, LiFe or NiCd/NiMh)
bullet Low Voltage Protection Cut-off Setting, either LOW (2.8v/50%, MEDIUM (3.0v/60%) or HIGH (3.2v/65%) or OFF
bullet Factory Default Setup Restore
bullet 3 x Timing Settings (in degrees) Auto, 2, 8, 15, 2, 30
bullet Start up strength, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%
bullet Governor Mode x 5 (for helicopter applications)
bullet Motor Rotation (clockwise\counterclockwise)
bullet Low Voltage Cut-off Type (power reduction or immediate shutdown)
bullet Extremely low internal resistance
bullet Super smooth accurate throttle linearity
bullet Safety Thermal Overload Protection
bullet Auto throttle shutdown in case of signal loss
bullet Data logging system such as temperature, voltage, current, RPM,
bullet SBEC Voltage Output 5.0, 6.0, 7.4v or 8.4v adjustable - great for high voltage servos
bullet High SBEC Current Output, continuous 8A, designed to meet your high current applications
bullet Power arm protection, over-heat protection, low-voltage protection and lost-signal protection
bullet Secondary sub-menu setting by LCD program card or PC interface
bullet Firmware updating by PC interface
bullet Unique metal shape designing gives your new fashion visual impact.
bullet Super smooth and accurate throttle linearity
bullet Support and match with most of the motors, including high RPM motors
bullet Programmable motor timing
bullet Utilizes new smaller MOSFET technology to minimize weight
bullet Finned heat sink
bullet Programmable throttle input range
bullet Anti-spark circuit eliminates (HV OPTO version only)

ESC battery & motor wires are supplied bare ended for you to fit your own connectors.


Gecko Software


You may download the Gecko PC software using this link. Please note this is an external link to our site, responsibilty for the contents rests with the software owner.

To download a PDF of the instruction book please click here


Gecko Series Programming Card
If you don't like programming from the transmitter then this easy to use programming card is the ideal partner for your ZTW Gecko series ESC. With this card setting features is a breeze, you will find yourself experimenting with different settings much more and changes at the field are so easy.


gifOutput gif85A (100A burst)
gifInput Voltage gif2 to 6 Li-Po, or 5 to 18 Ni-MH/Ni-Cd
gifBEC (Battery
gifElimination Circuit)
gif5.0V/6.0V/7.4V/8.4V adjuatable 8A, Switch Mode
gif66mm x 33mm x 16mm
gifWeight gif74g