browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Fuel Accessories

1 metre 2mm (3/32)
Natural Silicone Fuel Tubing
FA1
Natural Silicone Fuel Tubing with 2mm internal diameter to fit all but the largest of common glow engines. Will not burn or deteriorate with age.

PLEASE NOTE: For Glow engines only, not suitable for petrol engines.

£
Quantity

1 metre 2mm (3/32)
Neon Green Fuel Tube
FA12
Neon Green (very bright!) fuel tubing. Coloured fuel tubing is great for colour coding your fuel lines. Use one colour for fill, one for feed & one for pressure and never get your lines mixed up again!

PLEASE NOTE: For Glow engines only, not suitable for petrol engines.

£
Quantity

1 metre 2mm (3/32)
Neon Pink Fuel Tube
FA13
Neon Pink (very bright!) fuel tubing. Coloured fuel tubing is great for colour coding your fuel lines. Use one colour for fill, one for feed & one for pressure and never get your lines mixed up again!

PLEASE NOTE: For Glow engines only, not suitable for petrol engines.

£
Quantity

1 metre 2mm (3/32)
Neon Yellow Fuel Tube
FA14
Neon Yellow (very bright!) fuel tubing. Coloured fuel tubing is great for colour coding your fuel lines. Use one colour for fill, one for feed & one for pressure and never get your lines mixed up again!

PLEASE NOTE: For Glow engines only, not suitable for petrol engines.

£
Quantity

Tygon Petrol/Diesel Fuel Tube 1/8 inch bore per foot
FA18
Tygon Fuel Tubing. Without a doubt, the best petrol or diesel tubing on the market today! It is as flexible as silicone but will withstand the effects of the fuel totally! It will not expand, shrink, or go hard-EVER!

Can also be used with glow fuel.

£
Quantity
switch

Recoil Fuel Tubing - Red Vinyl
FE11
Forget about yards of trailing tubing from your flight box when you're filling the tank - just get a length of recoil tubing and do the job properly! The vinyl recoil tube is suitable for both glow fuel and petrol.

Ideal for use with the pumps below.

 

£
Quantity
switch

Recoil Fuel Tubing - Yellow Silicone
FE29
Forget about yards of trailing tubing from your flight box when you're filling the tank - just get a length of recoil tubing and do the job properly! This eyecatching fluorescent yellow tube is from soft, flexible silicone for use with glow fuel.

 

£
Quantity
switch

Recoil Fuel Tubing - Orange Silicone
FE30
Forget about yards of trailing tubing from your flight box when you're filling the tank - just get a length of recoil tubing and do the job properly! This eyecatching fluorescent yellow tube is from soft, flexible silicone for use with glow fuel.

 

£
Quantity

Tidy Fuelling System
FA3 A neat fuelling system where a remote fuelling point is needed. Can be mounted out of sight.

Install the flush fuelling flanges to either side of your fuselage wall. Run the fuel pipe from your filler pipe on the tank & through the fuel filler flange on the fuselage.Insert the stopper into the fuel pipe and push firmly into the filler flange.
Now for the easy part. Pull out the fuel stopper and remove from the fuel pipe. Fuel your model in the normal way and replace the stopper then push back into the flange. How easy is that!

£
Quantity

Standard Fuel Filter
FA2
Machined metal screw-together filter with wire gauze for glow and diesel.

Fit these in the fuel line between your tank and carb, as well as the fuel line on your fuel pump/field box.
If you don't use a filter the first stop for debris is your carb - so it's a small price to pay to prevent an engine failure due to fuel blockage!

£
Quantity

Deluxe Fuel Filter with mount (Sintered)
FA3
A really neat deluxe fuel filter. How often does your fuel filter vibrate when the engine is running, often rubbing against the crankcase side causing marks.
This filter has a clip release mount that can be bolted to a convenient place, the filter is clipped in, thus remaining rigid.
Sintered bronze fuel filter, hard anodised.

Please note colour of anodised products may vary.

£
Quantity

Self Priming Fuel Filter with mount
FA4
A cunning priming system & sintered filter combined in one unit.
Why has no-one thought of this before? One quick squeeze & your engine is primed & ready to go!

Also includes a mount as per the filter above. The ultimate fuel filter!

Please note colour of anodised products may vary.

£
Quantity

Sintered Petrol Filter
FA22
A large one way high pressure sintered filter specially designed for pertrol (gas) engines

Fits standard tygon or similar petrol fuel line. Robust leak free glanded construction and features threaded locking glands at either end to make sure the line stays on.
A quality product for those that want the best.

£
Quantity

The 'Ultimate Clunk' Anti -Foaming Clunk Tank Clunk
FA19
Designed to replace the standard clunk weight in your tank, providing a further fuel filter and helps prevent foaming and bubbles thus ensuring a clean fuel flow. The high 4.8g weight ensures this clunk follows the fuel under the most high stress flight situations.
A great item for any tank installation.

£
Quantity

Anti -Foaming Clunk Tank Clunk Fuel Filter
FA5
Designed to replace the standard clunk weight in your tank, providing a further fuel filter and helps prevent foaming and bubbles thus ensuring a clean fuel flow.
A great item for any tank installation.

£
Quantity

Fuel Tube Bung
FA6
Still sticking an old screw or matchstick in your fuel tubing to act as a bung? Then don't! This stylish bung is purpose made for the job, positive bard fit yet easily removable, fuel won't leak with one of these fitted and air can't enter to spoil your tank pressurisation.

Please note colour of anodised products may vary.

£
Quantity

Fuel Stop/Bung with Mounting Ring
FA21 A practical attractive alternative to the filler pipe hanging in the breeze! The mounting ring with gland nut locates in the fuselage or cowl side. the fuel pipe is fuller though this ring for filling, and once full the bung is inserted in the fuel pipe and then pushed back into the ring - neat! For standard size fuel tube and up to 6mm thick walls.

£
Quantity

Fuel Tube Cut-off Clamp Pack of 2
FA7
A really handy cut of clamp that cuts off the fuel flow when not in use.

Prevents siphoning of fuel into the carb when not running, and stops fuel spill when your model is stored or during transport. Clamp can remain permanently on the line until required so you won't lose it!

£
Quantity

Fuel Filling Nozzle
FA8
Designed to fit on your fuel filling line from your pump, this nozzle has a tapered/barbed end that provided a positive fit into the tank line yet is easily inserted and removed. Beats an old length of brass tube and helps prevent the line slipping out during refueling, which often results in a soaking!

£
Quantity

Fuel Tank Inlet/Outlet
FA9
A neat two part threaded fuel tank inlet/out with rubber seal.
Can be used mounted on the fuselage side for tank filling, and is also useful for mounting on the side of your field box for connection to the fuel pump.

Please note colour of anodised products may vary.

£
Quantity

120º Fuel Tank Inlet/Outlet
FA10
Similar to above but with a 120º bend, two part with a rubber seal.

Can be used mounted on the fuselage side for tank filling, and is also useful for mounting on the side of your field box for connection to the fuel pump.

Please note colour of anodised products may vary.

 

£
Quantity

Fuel Pipe Plastic 90º Elbow Joiner

(Pack of 4)
FA24
These handy accessories make connections in the fuel/water-cooling tubing simple and neat.

For glow fuel. silicone tube use only.

 

£
Quantity

Fuel Pipe Plastic Straight Joiner

(Pack of 4)
FA25
These handy accessories make connections in the fuel/water-cooling tubing simple and neat.

For glow fuel. silicone tube use only.

 

£
Quantity

Fuel Pipe Plastic 'T' Joiner

(Pack of 4)
FA26
These handy accessories make connections in the fuel/water-cooling tubing simple and neat.

For glow fuel. silicone tube use only.

 

£
Quantity

Fuel Cut off Valve - Glow
FA27
Stop those fuel leaks with this handy fuel cut off valve.

Neat, Simple and very Practical!

For glow fuel. silicone tube use only.

£
Quantity

Fuel Pipe 'Y' Joiner
FA11
A handy fuel pipe 'Y' joiner with a multitude of uses.

Can be used in dual tank installations, with header tanks and no doubt ingenious modellers will find other uses!

Can also be used with air retracts.

 

£
Quantity

Irvine Engine Test Stand
FA28
Made of strong and sturdy metal, this engine stand can accommodate a
wide engine range. Installation is simple enough by firmly attaching the
stand to a work bench or solid surface before test running your new engine.

A 'must have' for the engine ethusiast.

 

£
Quantity

Deluxe Power Model 2T-S Oil (500ml)FA20
High Quality 2-Stroke Oil specilly designed for model 2 stroke petrol engines. Primarily designed for 50/1 use the engine will offer superior throttle response and save you money on the oil bill! Comes in a specially designed bottle which makes measuring the amount of oil you require fool-proof - just what we all have been waiting for!

 

£
Quantity

Model Technics Hi-Viz Fuel Dye
FA15
A great product particularly for Helicopter flyers or those that have an external fuel tank that can be seen in flight. Add some to the fuel and your tank level can easily be seen in flight.

Works with all blends of glow fuel, 2 and 4 stroke and does not affect the performance of your fuel.

 

£
Quantity

Model Technics After Run Oil
FA16
After Run Oil should be put into the engine after each session of use to give additional corrosion protection. It also makes a superb general purpose lubricating oil and is supplied in a spouted container.

4 stroke engines are particularly prone to bearing corrosion, but any engine will benefit from its use, especcially those running on high nitro contents.

 

£
Quantity