browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Adjustable Engine Mounts

Adjustable Engine Mount Small for approx .20 - .40 engines AEM1
2 Part mounts allow adjustment of the bearer width to accommodate your cranckcase width exactly. Really tough mounts moulded from a glass filled composite material webbed for strength, with nosegear holes at this size. Fit with M3 Nuts/bolts which you can find here.
Length (overall) 70mm bearer width 27mm (minimum) to 34mm (maximum).

£
Quantity

Adjustable Engine Mount Medium for approx .40 - .70 engines AEM2
2 Part mounts allow adjustment of the bearer width to accommodate your cranckcase width exactly. Really tough mounts moulded from a glass filled composite material webbed for strength, with nosegear holes at this size. Fit with M3 Nuts/bolts which you can find here.
Length (overall) 79mm bearer width 35mm (minimum) to 43mm (maximum).

£
Quantity

Adjustable Engine Mount Large for approx 1.20 - 1.80 engines AEM3
2 Part mounts allow adjustment of the bearer width to accommodate your cranckcase width exactly. Really tough mounts moulded from a glass filled composite material and heavily webbed for super strength. Fit with M4 Nuts/bolts which you can find here.
Length (overall) 127mm bearer width 48mm (minimum) to 64mm (maximum).

£
Quantity
T Mount (Isosceles) Engine Mounts

T Mount (Pair) for approx .12 - .25 engines TM1
T mounts have many advantages, can be set to any width and leaves the centre clear for fuel lines and noseleg fittings. Moulded from a glass filled composite material webbed for strength. Fit with M3 Nuts/bolts which you can find here.
Length (overall) 48mm bearer width unlimited.

£
Quantity

T Mount (Pair) for approx .19 - .35 engines TM4
T mounts have many advantages, can be set to any width and leaves the centre clear for fuel lines and noseleg fittings. Moulded from a glass filled composite material webbed for strength. Fit with M3 Nuts/bolts which you can find here.
Length (overall) 69mm bearer width unlimited.

£
Quantity

T Mount (Pair) for approx .40 - .55 engines TM2
T mounts have many advantages, can be set to any width and leaves the centre clear for fuel lines and noseleg fittings. Moulded from a glass filled composite material webbed for strength. Fit with M3 Nuts/bolts which you can find here.
Length (overall) 88mm bearer width unlimited.

£
Quantity

T Mount (Pair) for approx .60 - .120 engines TM3
T mounts have many advantages, can be set to any width and leaves the centre clear for fuel lines and noseleg fittings. Moulded from a glass filled composite material webbed for strength. Fit with M4 Nuts/bolts which you can find here.
Length (overall) 100mm bearer width unlimited.

£
Quantity
Standard Engine Mounts

JP/Radio Active Glass Filled Engine Mount for .19-.30 Engines
EM1
Superb quality Engine Mounts manufactured from glass reinforced nylon.
Webbed bearers for extra strength and vibration absorption. Rear recess for nose leg wire if required, and large opening for fuel line routing.

Distance between bearers: 29mm

£
Quantity

JP/Radio Active Glass Filled Engine Mount for .30-.45 Engines
EM2
Superb quality Engine Mounts manufactured from glass reinforced nylon.
Webbed bearers for extra strength and vibration absorption. Rear recess for nose leg wire if required, and large opening for fuel line routing.

Distance between bearers: 33mm

£
Quantity

JP/Radio Active Glass Filled Engine Mount for .40-.60 Engines
EM4
Superb quality Engine Mounts manufactured from glass reinforced nylon.
Webbed bearers for extra strength and vibration absorption. Rear recess for nose leg wire if required, and large opening for fuel line routing.

Distance between bearers: 40mm

£
Quantity

JP/Radio Active Glass Filled Engine LONG Mount for .30-.45 Engines
EM3
Superb quality Engine Mounts manufactured from glass reinforced nylon.
Webbed bearers for extra strength and vibration absorption. Rear recess for nose leg wire if required, and large opening for fuel line routing. This is the long version

Distance between bearers: 33mm

£
Quantity

JP/Radio Active Glass Filled Engine LONG Mount for .40-.61 Engines
EM5
Superb quality Engine Mounts manufactured from glass reinforced nylon.
Webbed bearers for extra strength and vibration absorption. Rear recess for nose leg wire if required, and large opening for fuel line routing. This is the long version

Distance between bearers: 40mm

£
Quantity

JP/Radio Active Glass Filled Engine LONG Mount for .61-.91 Engines
EM6
Superb quality Engine Mounts manufactured from glass reinforced nylon.
Webbed bearers for extra strength and vibration absorption. Rear recess for nose leg wire if required, and large opening for fuel line routing. This is the long version

Distance between bearers: 43mm

£
Quantity