browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Connectors
switch

2-Pin Deans T-Connectors
One Pair Male & Female
CRHM02A 'Deans' connectors are the staple diet of electric flight. The most popular form of connector for Lipos, ESC's etc. Provides a very secure connection. Supplied complete with heat shrink.

£
Quantity
switch

2-Pin Deans T-Connectors
FOUR Pairs Male & Female
CRHM02B

As above but in a money saving 4 Pack.

Buy 3 get one Free!

£
Quantity
switch

2-Pin Deans T-Connectors with sheath One Pair Male & Female
DTS1A A really neat alternative to standard Deans. Features a sheath to cover your soldered connectors instead of the usual heat shrink. Compatible with all Deats Standard T connectors. From the world leaders AMASS. Superb!

£
Quantity
switch

2-Pin Deans T-Connectors with sheath FOUR Pairs
Male & Female
DTS1B

As above but in a money saving 4 Pack.

Buy 3 get one Free!

£
Quantity
switch

Deans Charge Cap - pack of 5
DCC1 Get yourself a bag or two of these nifty charge caps and never again will you stare blankly at a battery pack whilst scratching your head. Charge your cells, clip a cap to the end of the connector and the job's done. There are safety benefits too. With the connector capped off, nothing can cause a short.

£
Quantity
switch

Rubber Protection Caps for Deans Male Plugs
DEACA1 Handy protection caps for male Deans plugs, helps prevent connector pins oxidation.

Supplied in packs of 2.

£
Quantity
switch

2-Pin Mini Deans T-Connectors
Two Pairs Male & Female
MDC1
Mini Version of the Deans 'T' connector good for a mximum of 15A continuous. Save weight and space with the convenience of a seure connection.

2 Pairs per pack.

£
Quantity
switch

2-Pin Micro Dean Style T-Connectors
Two Pairs Male & Female
CRHM09
Micro Deans Gold Plated connectors for the smaller modeler, capable of handling up to 11A, much lighter than standard Deans - great for indoor models.

£
Quantity
switch

Deans Parallel Connector CPC2
For connecting 2 lipo packs in parallel to increase the capacity. i.e. 2 x 2200mAh 3S packs connected gives 1 x 4400mAh 3s Pack. It is strongly advised that connected packs should be the same capacity, manufacturer and condition. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

Deans Serial Connector CPC1
For connecting 2 lipo packs in serial to increase the voltage. i.e. 2 x 2200mAh 3S packs connected gives 1 x 2200mAh 6s Pack. It is strongly advised that connected packs should be the same capacity, manufacturer and condition. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

EC3 Device & Battery Connector
One Pair Male & Female
CRHM01 An increasingly popular alternative to 'Deans' connectors, these provide an ergonomically pleasing and easy to grip connection capable of handling 60 continuous amps. Pack contains 1 pair.

£
Quantity
switch

EC3 Charge Cap - pack of 5
EC3CC Get yourself a bag or two of these nifty charge caps and never again will you stare blankly at a battery pack whilst scratching your head. Charge your cells, clip a cap to the end of the connector and the job's done. There are safety benefits too. With the connector capped off, nothing can cause a short.

£
Quantity
switch

EC3 Parallel Connector CPC5
For connecting 2 lipo packs in parallel to increase the capacity. i.e. 2 x 2200mAh 3S packs connected gives 1 x 4400mAh 3s Pack. It is strongly advised that connected packs should be the same capacity, manufacturer and condition. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

EC3 Serial Connector CPC6
For connecting 2 lipo packs in serial to increase the voltage. i.e. 2 x 2200mAh 3S packs connected gives 1 x 2200mAh 6s Pack. It is strongly advised that connected packs should be the same capacity, manufacturer and condition. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

MT60 3.5mm Motor Connector Set
MT60
These are becoming very popular and it's not difficult to see why. Easy to solder, no heatshrink required, and short circuit protection. These provide a neat, safe practical solution for Motor/ESC connections.

£
Quantity
switch

EC5 Device & Battery Connector
One Pair Male & Female
CRHM15
5mm Heavy Duty version of the EC3 for high curent applications

Pack contains 1 pair.

£
Quantity
switch

XT60 Device & Battery Connector
One Pair Male & Female
XT601 Another increasingly popular alternative to 'Deans' connectors, XT60 connectors provide a solid connector capable of hadnling up to around 65A. Connectors are moulded into the cases so they are very hard wearing.

£
Quantity
switch

XT60 Connector with Sheath Housing
One Pair Male & Female
XT601S A really neat alternative to standard XT60's. Features a sheath to cover your soldered connectors instead of the usual heat shrink. Compatible with all XT60 Standard connectors. From the world leaders AMASS. Superb!

£
Quantity
switch

XT60 Connector with Lock & Housing
One Pair Male & Female
XT601HLThe best XT60 you can buy! Supplied with neat sheaths PLUS a locking tab for the neatest most secure connection you can get. Compatible with all XT60 Standard connectors. From the world leaders AMASS. Superb!

£
Quantity
switch

XT60 Charge Cap - pack of 5
XT60CC Get yourself a bag or two of these nifty charge caps and never again will you stare blankly at a battery pack whilst scratching your head. Charge your cells, clip a cap to the end of the connector and the job's done. There are safety benefits too. With the connector capped off, nothing can cause a short.

£
Quantity
switch

XT90 Device & Battery Connector
One Pair Male & Female
XT901 Another increasingly popular alternative to 'Deans' connectors, XT90 connectors provide a solid connector capable of hadnling up to around 90A. Connectors are moulded into the cases so they are very hard wearing.

£
Quantity
switch

XT90 Anti-Spark Device & Battery Connector One Pair Male & Female
XT90AS Anti-Spark version of the XT90 with protective cap for those critical high voltage applications.Compatible with all XT90 Standard connectors. From the world leaders AMASS. Superb!

£
Quantity
switch

XT60 Parallel Connector CPC3
For connecting 2 lipo packs in parallel to increase the capacity. i.e. 2 x 2200mAh 3S packs connected gives 1 x 4400mAh 3s Pack. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

XT60 Serial Connector CPC4
For connecting 2 lipo packs in serial to increase the voltage. i.e. 2 x 2200mAh 3S packs connected gives 1 x 2200mAh 6s Pack. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

XT60 Parallel Connector Block TypeXTPB1 For connecting 2 lipo packs in parallel to increase the capacity. i.e. 2 x 2200mAh 3S packs connected gives 1 x 4400mAh 3s Pack. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

XT60 Serial Connector Block Type
XTSB1
For connecting 2 lipo packs in parallel to increase the capacity. i.e. 2 x 2200mAh 3S packs connected gives 1 x 4400mAh 3s Pack. DO NOT USE FOR CHARGING - LIPOS MUST BE CHARGED INDIVIDUALLY

£
Quantity
switch

XT60 Female to Deans Male Conversion Connector
CRHM120
Useful conversion connector, Female XT60 to Male Deans.

 

 

 

£
Quantity
switch

XT60 Male to Dean Female Conversion Connector
CRHM121
Useful conversion connector, Male XT60 to Female Deans.

 

 

 

£
Quantity
switch

Male Deans to Mini JST (Red) Female Conversion Connector
CRDNA0108
Useful conversion connector, Male Deans to Mini JST Female.

 

 

 

£
Quantity
switch

Male Deans to 4mm Bullet Female Conversion Connector
RDNA0259
Useful conversion connector, Male Deans to 4mm Bullet.

 

 

 

£
Quantity
switch

Male Deans to Tamiya Female Conversion Connector
RDNA0109
Useful conversion connector, Male Deans Tamiya Female.

 

 

 

£
Quantity
switch

Male Deans to Female EC3 Conversion Connector
RDNA0106
Useful conversion connector, Male Deans EC3 Female.

 

 

 

£
Quantity
switch

2mm Power Connection Set
25PCS For those that insist on using gold bullet connectors as lipo connectors here is a safe alternative - a set of 2mm connectors housed in a safe plastic male and female connector housing. Much safer as these is no chance of the connectors touching.

£
Quantity
switch

3.5mm Power Connection Set
35PCS For those that insist on using gold bullet connectors as lipo connectors here is a safe alternative - a set of 3.5mm connectors housed in a safe plastic male and female connector housing. Much safer as these is no chance of the connectors touching.

£
Quantity
switch

Traxas Style & Battery Connector
One Pair Male & Female
TRAXC1 Mainly used by R/C car enthusiasts, Traxas type battery connectors are also finnding favour among aircraft enthusiasts.

Supplied as one pair male & female.

£
Quantity
switch

0.8mm Gold Plated Connectors
(3 pairs)
CRHM03 Tiny, ultra micro 0.8 mm connectors supplied 3 pairs male and female.

Aimed mainly at the indoor enthusisat

these are very hard to find - but we have them!

£
Quantity
switch

2mm Gold Plated Connectors with Heatshrink (3 pairs)
CRHM03A
Gold (plated) connectors for the smaller project. Capable of handling loads up to a maximum of 20A and lightweight, and very easy to solder and install.

£
Quantity
switch

2.0mm Gold Plated Connectors with Heatshrink (10 pairs)
CRHM03B

As above but in a money saving bulk pack of TEN pairs and heatshrink.

£
Quantity
switch

3.5mm Gold Plated Connectors with Heatshrink (3 pairs)
CRHM04A
3.5mm gold (plated) connectors, the standard for all mid range electric ESC, Motor connections etc. Supplied with heatshrink and able to handle up to 80A.

£
Quantity
switch

3.5mm Gold Plated Connectors with Heatshrink (10 pairs)
CRHM04B

As above but in a money saving bulk pack of TEN pairs and heatshrink.

£
Quantity
switch

3.5mm Brushless Connection set
35BMS
An alternative to using 3.5mm connectors alone for a brushless/esc connection. Comprises 3 x male & female connectors with neat plastic housings so all 3 can be connected/disconnected at once and doesn't require heatshrink - neat!

£
Quantity
switch

4mm Gold Plated Connectors with Heatshrink (3 pairs)
CRHM05A
4mm gold (plated) connectors, the standard for all larger electric ESC, Motor connections etc. Supplied with heatshrink and able to handle up to 80A.

£
Quantity
switch

4mm Gold Plated Connectors with Heatshrink (10 pairs)
CRHM05B

As above but in a money saving bulk pack of TEN pairs and heatshrink.

£
Quantity
switch

6mm Bullet Connectors Male & Female (3 pairs)
CRHM14 6mm Bullet connectors for motor and power connectors. Tight petal opening on male side and half open solder bucket for easy soldinging. Big connectors for serious stuff!

Supplied as 3 pairs male and female.

£
Quantity
switch

8mm Bullet Connectors Male & Female (3 pairs)
CRHM15 8mm Bullet connectors for motor and power connectors. Tight petal opening on male side and half open solder bucket for easy soldinging. Capable of handling up to 200amps!

Supplied as 3 pairs male and female.

£
Quantity
switch

MPS Style Connectors (1 Par)
MPXCS1
Introduced to our range by popular demand these connectors these connectors have a multitude of uses.

Very popular as servo connections for plug in wings, and for batteries already fitted with MPX connectors.

£
Quantity
switch

JST Female Connector with 100mm Pigtail Lead
CRHM10
JST 'Pigtail' Connector Lead with 100mm 20AWG positive and negative silicone wire with a tinned end for you to solder to your own wires.

A hard to find item but we have them!

£
Quantity
switch

JST Male Connector with 100mm Pigtail Lead
CRHM11
JST 'Pigtail' Connector Lead with 100mm 20AWG positive and negative silicone wire with a tinned end for you to solder to your own wires.

A hard to find item but we have them!

£
Quantity
switch

JST DIY Connector set x5
CRHM12
For the more experienced modller who wishes to make up their own JST connectors this is just the job. Comprises of 5 x male and female socket mouldings and connector pins.

£
Quantity
switch

Servo Lead Universal Connector Set x6
CRHM13
For the more experienced modller who wishes to make up their servo extensions etc this is just the job. Compises of 6 x sets male and female

£
Quantity
switch

JST-XH DIY Balance/Charge Connector Pair 3 pin for 2 cell lipos
JSTD3
Hard to find and incredibly useful, use for replacing worn JST balance connectors, making up charge leads, extensions etc.

Supplied as one pair (male & female) with metal pins on a sprue.

£
Quantity
switch

JST-XH DIY Balance/Charge Connector Pair 4 pin for 3 cell lipos
JSTD4 Hard to find and incredibly useful, use for replacing worn JST balance connectors, making up charge leads, extensions etc.

Supplied as one pair (male & female) with metal pins on a sprue.

£
Quantity
switch

JST-XH DIY Balance/Charge Connector Pair 5 pin for 4 cell lipos
JSTD5 Hard to find and incredibly useful, use for replacing worn JST balance connectors, making up charge leads, extensions etc.

Supplied as one pair (male & female) with metal pins on a sprue.

£
Quantity
switch

JST-XH DIY Balance/Charge Connector Pair 6 pin for 5 cell lipos
JSTD6 Hard to find and incredibly useful, use for replacing worn JST balance connectors, making up charge leads, extensions etc.

Supplied as one pair (male & female) with metal pins on a sprue.

£
Quantity
switch

JST-XH DIY Balance/Charge Connector Pair 7 pin for 6 cell lipos
JSTD7
Hard to find and incredibly useful, use for replacing worn JST balance connectors, making up charge leads, extensions etc.

Supplied as one pair (male & female) with metal pins on a sprue.

£
Quantity
switch

3.5mm to 4mm Banana
Converters (one pair)
CRHM06
Really useful converters that are hard to find. Use for converting charge leads etc. Worth buying for your 'bits box' - will always come in useful!

£
Quantity
switch

3.5mm Banana Plugs (one pair)
CRHM07
3.5 mm banana plugs for charge leads, glow panel connections etc.

These have a tight screw clamp for the wire, so no soldering is required!

£
Quantity
switch

4mm Banana Plugs (one pair)
CRHM08
The standard for the majority of chargers, so really useful for making up your own charging leads. Easy to solder with soft rubber sleeves that slide on and create a tight grip. No threads to struggle with!

£
Quantity
switch

Cold Press Terminals Small
(Pack of 10)
CPT1
Cold Press Terminals are handy things to have for models, workshops, field boxes, charging stations etc. Supplied in a handy pack of 10.

Small size for 1.5mm dia. wire and 3mm fork inner spacing.

£
Quantity
switch

Cold Press Terminals Large
(Pack of 10)
CPT2
Cold Press Terminals are handy things to have for models, workshops, field boxes, charging stations etc. Supplied in a handy pack of 10.

Small size for 4mm dia. wire and 5mm fork inner spacing.

£
Quantity
switch

Aluminum Multifunction Soldering Station for RC connectors
TO49
Struggle with soldering connectors? Then we have the answer. Holds connectors tight whilst you solder them. Fits 2, 3, 3.4, 4mm bullets, XT60,90, Deans and can be shimmed for many other connectors.

Once used you will wonder how you ever managed without one. Manufactured from blue anodised CNC aluminium.

 

 

£
Quantity