browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc

Clevis & Connectors

prop

Chrome Quick Links M2 (Pack of 4) ASGP2
The most positive link you can buy, very positive snap action and metal construction means these won't give way in a hurry!
Chrome plated to prevent rusting.

Length: 30mm for M2 rod.

Quantity
£
prop

Metal Quick Links M3 (Pack of 2) ASHM91
The most positive link you can buy, very positive snap action and metal construction means these won't give way in a hurry!
M3 thread for larger models and applications.

Quantity
£
prop

Mini Snap Snap Link M2 (Pack of 4) ASGP1
Classic Mini Snap Link, positive snap action for the small to medium size model. Use a short length of silicone tube as a keeper if desired for extra security.

Length: 30mm for M2 rod.

Quantity
£
prop

Mini Snap Snap Link for 1.5 mm rod (Pack of 4) ASGP1B
Classic Mini Snap Link, positive snap action for the small to medium size model. Can be either glued to 1.5 mm carbon rod or self tap in 1.5mm threaded rod.

Quantity
£
prop

Nipple Link Adapter (Pack of 2) ASHM27
A very popular link using a solderless nipple that can be used on piano wire & flexible pushrods. Slide on and retain tightly with screw, with easy further adjustment. Great for throttles!

Length: 25mm

Quantity
£
prop

Metal Threaded Ball Link Non Removalble Type + M2 Nuts ASHM89 These ball links are designed for heavier use and are non-removable. The neck will accept an M2 threaded rod or extender. Comes complete with M2 nuts.

Quantity
£
prop

Metal Threaded Ball Link Non Removalble Type + M3 Nuts ASHM90 These ball links are designed for heavier use and are non-removable. The neck will accept an M2 threaded rod or extender. Comes complete with M3 nuts.

Quantity
£
prop

Heavy Duty M3 Ball Joint Pack of 2 ASHM92 For the larger model these heavy duty ball joints are designed to self tap on M3 Rod and the balls have a 2mm hole that can accept an M2 bolt for attachment to your horn/arm etc.

Quantity
£
prop

Ball Link Connector Set (Pack of 4) ASHM39
Ideal for all connections where a flexible joint is required, fitting pushrods to horns, servos, throttle linkages etc. These are more lightweight general use ball links for M2 rod.

Length: 21mm, thread M2.

Quantity
£
prop

Solder Extender M2 Pack of 4 ASGP3
M2 solder extender suitable for rigid and bowden cable links. Chrome plated to prevent rusting.

Length: 28mmm for M2 rod/cable

Quantity
£
prop

1.8mm Nylon Swing Keepers (Pack of 4) ASHM29
Bend your pushrod end to 90º, push through the servo arm or horn & retain with this keeper. A simple linkage keeper where adjustment is not required. For 2.0mm wire.

Dia: 1.8mm Length: 23mm Depth: 8mm

Quantity
£
prop

Mini Nylon Quick Keepers (Pack of 4) ASHM45
Similar to the above but for smaller/electric models and to fit
16 s.w.g. wire/pushrod. A simple, lightweight linkage solution where length adjustment is not required.

Length: 14mm

Quantity
£
prop

Dubro Micro E/Z Link (Pack of 4) ASHM72
Tiny Micro Quick keeper for Indoor and Park Fly Models. Designed to fit .032 pushrods. This one is manufactured by Dubro so quality is guaranteed.

Quantity
£
prop

Strip Aileron (or split elevator) Linkage (Pair) ASHM41
Two in a set, 6-1/4" rod set at 90° one end and threaded, with adjustable control horn to allow variable movement of control surface, supplied with two bearings.

Horn Height Adjustment: 31-37mm Length: 160mm

Quantity
£
prop

Aileron Horn 12G 5 hole pack of 4 ASHM109
Strip aileron horn self taps to M3 rod/stud.

Also suitable elevators/rudders etc.

Supplied in a pack of 4.

Quantity
£
prop

Aileron Bearing 12G ASHM110
Aileron or other Bearing for 12G rod.

Supplied in a pack of 4.

Quantity
£
prop

1.8mm Linkage Stoppers (Pack of 4) ASHM31
A quick & easy way of locking the pushrod to the servo arm or horn. Push the wire through the horn, adjust for length as required then tighten the grub screw. Suitable for smaller electric models etc.

Quantity
£
prop

2.1mm Linkage Stoppers (Pack of 4) ASHM32
A quick & easy way of locking the pushrod to the servo arm or horn. Push the wire through the horn, adjust for length as required then tighten the grub screw. Suitable for smaller electric models etc.

Quantity
£
prop

Heavy Duty 2.1mm Linkage Stoppers (Pack of 4) ASHM48
Heavy duty version of above, with M3 grub screw, bearing washer and grooved post to accept supplied circlip.

Quantity
£
prop

Standard Duty Closed Loop Adaptors M2 (Pack of 2) ASHM49
Standard duty closed loop adaptors, thread your closed loop wire through the predrilled hole, crimp as usual and fit your choice of M2 clevis to the threaded adaptor.

Quantity
£
prop

Heavy Duty Closed Loop Adaptors M3 (Pack of 4) ASHM50
Standard duty closed loop adaptors, thread your closed loop wire through the predrilled hole, crimp as usual and fit your choice of M3 clevis to the threaded adaptor.

Quantity
£
prop

0.8mm Closed Loop Wire Set (1m x 2 with Crimp Tubes)ASHM50
0.8mm Closed loop wire, 2 pieces 1000mm length with 4 x brass crimp tubes. Plastic coated to reduce friction/wear and electrical interference. The best!

Quantity
£