tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc
Electric Retracts 60-120 Main Set And Legs(2)

Get those legs up!

These self-contained units are powered from your model’s battery and connect straight into your receiver requiring no seperate servo or air line making these a simple easy to fit dependable unit.

Supplied with coiled wire strut installed, plus adjustable axle, wheel collar, hex wrenches and a 3-into-1 wiring harness.

Please see the instructions in PDF format below for further details.


Current draw at idle: 5mA

Operating current 900mA (maximum)

Pulse width trigger points: Down 1.331ms, Up 1.690ms

Operation with FM and DSM

FM22ms frame rate, 5V signal

DSM 20ms frame rate, 3.3V signal

Sequence time: @ 4.8V 1.25sec, @ 6.0V 1.0sec, @ 7.4V 0.8sec

Operating voltage range: 4.8 – 7.4V
Aircraft weight: 3.5 - 6.8kg

Unit weight: Nose gear 130g, Main gear 130g each


pdfTo download a PDF of the instruction book please click here